Brands

Avaya IP500 Universal PRI Trunk Card

PRI Trunk Card

SKU: 700417439/A/R

Avaya IP500 Universal PRI Trunk Card

Ask a question about this product

IP500 trunk cards can be fitted to existing IP500 base cards to provide support for trunk ports. The trunk card uses the ports provided on the base card for cable connection. The addition of an IP500 trunk card is supported on IP500 Digital Station, IP500 Analog Phone and IP500 VCM base cards. They are not supported on the IP500 Legacy Card Carrier base card.

For those base cards that support trunk cards, there are no restrictions on the combination of card types.

However in systems with both Analog Phone 8 base cards and analog trunk cards, combining the two types are recommended as it then provides analog power failure support for one trunk/extension (Not applicable to the Analog Phone 2 base card).

Each trunk card is supplied with the spacer pegs required for installation and a label to identify the card's presence on the physical unit once installed.

This type of card can be added to an IP500 Digital Station card, IP500 Analog Phone card, TMC8 card or IP500 VCM card. It allows that card to then also support primary rate digital trunk connections. Available in single and dual versions the IP500 PRI card provides single and dual primary rate trunk interfaces respectively. The PRI is configurable for T1, E1 or E1R2 MFC use depending on the territory.

The IP500 Universal PRI trunk cards incorporate an integrated CSU/DSU. The CSU function allows the trunk to be put in loop-back mode for testing purposes. This can be set manually, using the monitor application, or automatically from a Central Office sending a Line Loop Back (LLB) pattern. The DSU function allows the T1 trunk to be shared between data and voice services. 

Avaya IP500 Universal PRI Trunk Card Capabilities

  • Each card is configurable to connect to T1, E1 or E1R2 lines.
  • The card is available in either a single or dual PRI variant. The single variant can support up to 24 T1 channels or up to 30 E1 channels. The dual variant can support up to 48 T1 channels or 60 E1 channels.
  • On each card, 8 channels per interface are enabled by default. This means that the single PRI has 8 channels enabled, while the dual PRI has 16 channels enabled. Further channels may be enabled by the purchase of additional licenses in 2-channel or 8-channel increments.
  • The IP500 PRI trunk card works on any IP500 VCM or extension base card (not the Legacy Card Carrier).
  • Up to four Universal PRI cards can be installed in any combination in the IP500 or IP500 V2 chassis.
  • Diagnostics capabilities:
    • Visual indicators to show service state
    • Physical test points to monitor traffic.
  • These trunks support the mobility features of Mobile Call Control and one-X Mobile client 

Avaya IP500 Universal PRI Trunk Card Features

  • Ports/Channels- 1 PRI trunk port.Connections via port 9 of the host IP500 base card.Supports the following PRI modes:
    • T1 robbed bit (24B Channels per port)
    • T1 PRI (23B D channels per port)
    • E1 PRI (30B D channels per port)
    • E1R2 PRI (30B channels per port)
  • License- Initially supports 8 B- channels. Additional channels are activated by IP500 Universal PRI licenses.
  • Maximum- 4 per IP500 control unit  

Avaya IP500 Universal PRI Trunk Card Compatibility

  • Compatible with IP500 digital station,analog station, and VCM base Cards
  • Compatible with IP Office R4.1 or higher
There are no documents.

Select Options

Our Price $329.00

IP500 trunk cards can be fitted to existing IP500 base cards to provide support for trunk ports. The trunk card uses the ports provided on the base card for cable connection. The addition of an IP500 trunk card is supported on IP500 Digital Station, IP500 Analog Phone and IP500 VCM base cards. They are not supported on the IP500 Legacy Card Carrier base card.

For those base cards that support trunk cards, there are no restrictions on the combination of card types.

However in systems with both Analog Phone 8 base cards and analog trunk cards, combining the two types are recommended as it then provides analog power failure support for one trunk/extension (Not applicable to the Analog Phone 2 base card).

Each trunk card is supplied with the spacer pegs required for installation and a label to identify the card's presence on the physical unit once installed.

This type of card can be added to an IP500 Digital Station card, IP500 Analog Phone card, TMC8 card or IP500 VCM card. It allows that card to then also support primary rate digital trunk connections. Available in single and dual versions the IP500 PRI card provides single and dual primary rate trunk interfaces respectively. The PRI is configurable for T1, E1 or E1R2 MFC use depending on the territory.

The IP500 Universal PRI trunk cards incorporate an integrated CSU/DSU. The CSU function allows the trunk to be put in loop-back mode for testing purposes. This can be set manually, using the monitor application, or automatically from a Central Office sending a Line Loop Back (LLB) pattern. The DSU function allows the T1 trunk to be shared between data and voice services. 

Avaya IP500 Universal PRI Trunk Card Capabilities

  • Each card is configurable to connect to T1, E1 or E1R2 lines.
  • The card is available in either a single or dual PRI variant. The single variant can support up to 24 T1 channels or up to 30 E1 channels. The dual variant can support up to 48 T1 channels or 60 E1 channels.
  • On each card, 8 channels per interface are enabled by default. This means that the single PRI has 8 channels enabled, while the dual PRI has 16 channels enabled. Further channels may be enabled by the purchase of additional licenses in 2-channel or 8-channel increments.
  • The IP500 PRI trunk card works on any IP500 VCM or extension base card (not the Legacy Card Carrier).
  • Up to four Universal PRI cards can be installed in any combination in the IP500 or IP500 V2 chassis.
  • Diagnostics capabilities:
    • Visual indicators to show service state
    • Physical test points to monitor traffic.
  • These trunks support the mobility features of Mobile Call Control and one-X Mobile client 

Avaya IP500 Universal PRI Trunk Card Features

  • Ports/Channels- 1 PRI trunk port.Connections via port 9 of the host IP500 base card.Supports the following PRI modes:
    • T1 robbed bit (24B Channels per port)
    • T1 PRI (23B D channels per port)
    • E1 PRI (30B D channels per port)
    • E1R2 PRI (30B channels per port)
  • License- Initially supports 8 B- channels. Additional channels are activated by IP500 Universal PRI licenses.
  • Maximum- 4 per IP500 control unit  

Avaya IP500 Universal PRI Trunk Card Compatibility

  • Compatible with IP500 digital station,analog station, and VCM base Cards
  • Compatible with IP Office R4.1 or higher
SKU 700417439/A/R
Our Price: $329.00
Type
Quantity

 

 
Copyright © 2014 The Voice & Data Warehouse. All Rights Reserved.

Web Site Design by Captiva Marketing