Avaya IP400 Phone 30 V2

The IP500 control unit has 4 slots for the insertion of cards. These cards can be divided into two types; base cards and trunk cards.  Base cards include a front panel and ports for cable connections. Trunk cards can be added to a base card in order to provide additional facilities (typically trunk connections).

The IP400 Phone V2 module (also known as the Phone V2 module) is used to add additional PHONE ports to an IP Office system. PHONE ports are used for analog phones. The Phone V2 module is available in 8, 16 and 30 port variants, referred to as the Phone 8, Phone 16 and Phone 30 respectively. The Phone V2 module supersedes the original IP400 Phone module, now referred to as the Phone V1. The module version is indicated by labels on both the base and the rear of the module.

Avaya IP400 Phone 30 V2 Key Changes

• The Phone V2 uses an earthed 3-pin 60W external power supply unit.
• With IP Office 3.1, the message waiting indication (MWI) on each POT port can be configured for None, On, 51V Stepped, 81V, Line Reversal A or Line Reversal B. On uses the default determined by the system locale. POT ports on a Phone V2 module can additionally be configured for 101V operation.
• The ports do not include a ringing capacitor. Therefore for phones where this is a requirement, connection should be via a Master socket containing ringing capacitors.
• The DTE serial port on the rear of the module has been changed to a 9-pin D-type socket

Avaya IP400 Phone 30 V2 Features

• Provides an additional 30  Plain Ordinary Telephone(POTS) ports for use with analog telephones

Avaya IP400 Phone 30 V2 Compatibility

• Compatible with IP403, IP406 V1, IP406 V2, and IP412 control units
• Compatible with IP500 control unit running R4.2 or earlier: Professional Edition is required
• Compatible with IP500 running R5.0 or higher
• Compatible with IP500 V2 running R6.0 or higher